Nothing provides matching joint halves with the ease and accuracy of the new Leigh FMT! Named one of Workbench Magazine’s Top 10 Innovative Tools of 2004, the FMT Jig allows you to rout both parts of the joint with just one joint guide, one router bit and one jig setup. Make pefect joints for everything from match-stick frames and miniature tables (rout joints smaller than 1/4" — so tiny they’re almost beyond belief!) to full-size chairs and 6-foot garden gates.

• It’s remarkably easy to set up perfectly aligned multiple mortises and tenons on the FMT. Precision and repeatability are made possible by adjustable table limit stops that control the table’s range of motion in both X and Y axes.
• With each mortise or tenon position sighted and limit stops set, you’re ready to rout double, quadruple, or even triple joints with the same ease and precision as a single mortise and tenon.
• With each mortise or tenon position sighted and limit stops set, you’re ready to rout double, quadruple, or even triple joints with the same ease and precision as a single mortise and tenon.
• Joint tightness is infinitely adjustable by simply turning a calibrated knob; the fit is recordable and repeatable.
• Sliding cursor provides easy alignment.
• Bolts to a board and clamps to a bench.
• No dedicated router is required!
• Comes with universal sub-base that attaches to virtually all plunge routers, five 5/16" guides that will make over 20 sizes of mortise and tenon, guide stand, 5/16" spiral upcut cutter with 1/2" shank, two cam-action Speed-Clamps, outrigger bars, adjustable sidestop fence, fully illustrated user guide, screwdrivers, and mounting hardware.
• Accessory kit includes eight 1/4" guides, four 3/8" guides, four 1/2" guides, eight-piece High Speed Steel spiral upcut bit set, and wood storage box.

JIG IT Mortising System from Rockler.com:

JIG IT Mortising System at Rockler.com
Now our Jig It mortising system can be used for locks, too! JIG IT Mortising System from Rockler.com

Hinge Mortising Jig from Rockler.com

Accurately create a variety of hinge mortises with this easy-to-use jig. Install butt hinges of all sizes with the standard jig. Use special inserts (sold separately) for butler and sewing machine hinges. Or make your own insert for custom jobs.  Hinge Mortising Jig is simple to operate...

Lock Mortising Jig from Rockler.com

Simply add the specialty inserts (sold separately) to our ''Hinge Mortising Jig'' and create a jig for lock mortises. This system lets you create a perfect mortise for a variety of locks.
Lock Mortising Jig system works with both half and full mortise locks...

Woodshop Calculator CD-ROM
Affordable software eliminates time and costly mistakes when making raised panel doors. Woodshop Calculator CD-ROM rockler.com

Leigh's Frame Mortise & Tenon Jig (FMT) From Woodcraft

Leigh's Frame Mortise & Tenon Jig (FMT) from Woodcraft is an industrial strength tool for easy production, and reproduction, of mortise and tenon joints in an immense variety of sizes, styles and angles. The FMT offers excellent simplicity of set-up and ease of use, while giving incredible accuracy of fit. Adjustability goes way beyond the possibilities presented by re-jigging for standard production mortise and tenons. Using the included 5/16" guide set and bit you can cut up to 20 variations of a 5/16" tenon, up to 1-1/2" wide with a depth of 1". With the addition of other guide sets you can expand your capacity to 1/4", 3/8" or 1/2" tenons, in fact, 68 different sizes of matching mortise and tenon joints are easily achieved using only 21 guides. Possible sizes are nearly endless with the built in table movement. Longer bits can increase tenon length to 2-1/8". Angles are easily set and changed regardless of number. The Leigh FMT is the only mortise and tenon jig you will need, and set-up and use is so fast and simple as to be almost unbelievable.

LEIGH Frame Mortise & Tenon Jig - Shop Woodcraft

New - DELTA 14-651 Deluxe Mortiser from rockler.com

The DELTA 14-651 includes 1/2HP, 120VAC 60 Hz, Single phase induction motor, 3/8" Capacity chuck and key, Four mortising chisels and bits, Tool and chisel holder, Riser block, Instruction manual Easy and open access to drill chuck for bit changing. Large cast-iron base with center through hole. Adjustable rack and pinion fence and rack and pinion head raising and lowering. Mortising head column can be turned 180° and remounted for off-table mortising. Adjustable fence and hold down. Adjustable dovetail way on mortising head Height attachment adds 1 3/4" of capacity under head Multi-position feed lever. Adjustable depth stop. Chuck key/hex wrench for bit and chisel changing. NEW - DELTA 14-651 Deluxe Mortiser from rockler.com

Rockler Log Tenon Maker

Rockler's new Tenon Maker cuts five different size tenons (5/8", 1", 1-1/2", 2", and 2-3/4" diameter in unlimited lengths) using your router and a carbide-tipped router bit.

• Tenons are cut by rotating the log through the wood guide. The carbide bit cuts the tenon in a matter of seconds.
• The Tenon Maker mounts directly to Rockler's exclusive aluminum router plate for use in the Rockler router table, or it can be mounted to any flat surface for stand-alone use out of the shop.
• The Tenon Maker includes the aluminum frame, your choice of one of the three wood guides, and a 1/2" shank router bit.
• Additional guides sold separately.
• Patented.

From WoodcraftPlans.com

Also, another good spot to find those "Hard to Find Woodworking Tools and Supplies"
"www.hartvilletool.com - Quality Woodworking Tools & Supplies at the Best Prices around."

Family Watchdog
Awareness is your Best Defense.

Contact Webmaster